If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
[CQ]
Aficio SP C231SF Half tones washout copies only
Working on the Kyocera version FS-1020C. Cleaned the mirrors and lense inside the CCD carriage and replaced the flouescent tube. No Help. Is there some internal dust leak in the CCD assy. Any help greatly appreciated
Noticed that the white reference strip on the bottom of the platen glass cover was almost completely grey from adhesive bleed through over time. taped a narrow strip trimmed from a UPS label and the problem was solved.
Comment