super user code for MP9000

[idplus2]

Hi everyone,

Do someone have any super user code for MP 9000. I would like to make active the ethernet usb board on this machine.

[rsyarcia]

what do you want supervisor login or super user code login?

[Moza]

This option is enabled in Service Mode SP5985 01-02

[rsyarcia]

you can read the security manual of the machine about the supervisor and administrator login info. (supervisor,admin)

[idplus2]

i want the super user code

what do you want supervisor login or super user code login?

i just want the super user code

[TonerMunkeh]

The super user code (if indeed there is one) won't activate the NIB. It has to be done in service mode.

[idplus2]

I suppose to enter a super user code to access the SP 5985 service code

[rsyarcia]

ok just wait, somebody will give you

[Mr. T]

no super code is needed just go to sp 5985 set to 0 turn off machine and on board nic will be enabled

[Jomama46]

Where are you getting your "super" information?

[rsyarcia]

lol

[idplus2]

Definitely i need it to do it. For another code like sp1xxxx, 2xxxx, 3xxxx, i dont need it but for sp5985 i need it.

[Jomama46]

Try this, In service mode. press and hold the # key when you press Copier Service.

[knightfall]

not even a thank you to you guys for pointing him straight. Ingrate.

[iMind]

not even a thank you to you guys for pointing him straight. Ingrate.

LOL, the guy killed himself with so many super user codes.....overdose