If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Change the door switches above the fuser and next to the main power switch before you look at the laser unit. Also, change the seals on the PCU and dev unit (G065 2279 and 3066) when you do this, one will probably be split leaking toner into the front of the machine. Unfortunately, just repairing an LD won't work, you need to change the complete laser unit.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Comment