Ricoh aficio spc231n service mode

[TecnocopyVI]

Hi guys, what is the combine of button for enter in Service Mode in RICOH SPC231n? Thank you

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads

Paul@justmanuals.com

[cobiray]

It's the same as all the other Ricoh family machines.

[TecnocopyVI]

Re: Ricoh aficio spc231n service mode

i haven't the button and number there is only stop/start,job reset,menu,escape,down,up and enter .
What i push?

[rthonpm]

Re: Ricoh aficio spc231n service mode

You can download the Smart Organising Monitor to access most of the service menus. I think this may also be built into the PCL driver for this model as well.

[TecnocopyVI]

Re: Ricoh aficio spc231n service mode

my problem is SC543 i want reset this sc i have change fuser but SC 543 always!

[Cipher]

Re: Ricoh aficio spc231n service mode

SOM > User tools > Printer Configuration > (enter the default service access code for this model range) > SP Mode 2 > Fuser SC Reset.

The print driver does need to be installed and the USB/TCPIP port configured correctly.
The SOM utility uses the print driver to send it's commands to the printer.

[teebee1234]

Re: Ricoh aficio spc231n service mode

FYI, the default service access code is "Admin074"

[TecnocopyVI]

Re: Ricoh aficio spc231n service mode

Spc 231n don't have service mode? Only som?

[zed255]

Re: Ricoh aficio spc231n service mode

Correct, access to the printer's service mode is via Smart Organizing Monitor (SOM). There is no display on the printer to see what you are doing. I had this a fuser error on one of these and didn't have the software. I had to do a little war driving to find an open wi-fi connection and download it (the customer's IT had disabled any ability to download files). It is a pain, but there isn't any other option for the printer. The MFP can be accessed the usual way as it has a keypad and display.

[rich2764]

Re: Ricoh aficio spc231n service mode

Hi guys, what is the combine of button for enter in Service Mode in RICOH SPC231n? Thank you

Hold down start/stop and escape, power on the printer. Continue to hold down for 10 or more seconds.

[laitang]

Re: Ricoh aficio spc231n service mode

Spc 231n don't have service mode? Only som?

To enter SP mode from the operation panel, do the following:
1/ Press both the Start/Stop key and the Escape key, and turn on the printer.
2/ Keep pressing these keys for more than 10 seconds, then you can access SP mode

[rich2764]

Re: Ricoh aficio spc231n service mode

To enter SP mode from the operation panel, do the following:
1/ Press both the Start/Stop key and the Escape key, and turn on the printer.
2/ Keep pressing these keys for more than 10 seconds, then you can access SP mode

Hello? Did my previous post not just say that or am I just imagining it?

Also you need to run SOM if you have a fuser code as it wont let you access SP mode.
You need a USB cable and the login required is Admin074 to access SP mode 2.