I'm looking for the part number for the Duplex exit sensor for this model. I cant find it in the parts cat. I also looked in the MPC5000 pc and cant find it there either. Any help?
-
sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+ -
Re: MPc5501 Duplex
The only sensors I can see around that neck of the woods are AW010107, AW500035 and AW020145. I'd have to guess at the one ending 0107.It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it. -
Re: MPc5501 Duplex
I'll go with the 0107 also. Thanks for the input TonerMunkeh. I hate these 3D parts list.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
Re: MPc5501 Duplex
I concur with TonerMunkeh that it is part #AW010107. Looking at the parts diagram on the point to points it is listed as sensor S7. From there I went to the point to point itself and it shows the duplex exit sensor connected by a common harness to the bypass pickup solenoid and the bypass paper detect switch. Going back to the crappy 3D diagram, it shows AW010107 (x2) in that location. I followed up with tech support and they agree.Comment
-
Re: MPc5501 Duplex
Thanks Teebee, such circuitous detective work!sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
Comment