MPC 2551 SC799

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jeffjazzy
    Technician

    Site Contributor
    • Aug 2011
    • 18
    #1

    [Error Code] MPC 2551 SC799

    Has anyone seen an SC799 problem on an MPC2551? We'd appreciate any help with this.

    Thanks,
    Jeffjazzy
    Tags: 551, appreciate, connection, error, help, motor, mpc, service manual, tray
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2458
      #2
      Re: MPC 2551 SC799

      SC799 = Output Tray Motor Error.

      Can be a motor overload or a loose connection.

        Comment

        • lupi
          Trusted Tech

          100+ Posts
          • Aug 2011
          • 102
          #3
          Re: MPC 2551 SC799

          SC779 B 1st Stopper Motor Error
          The 1st stopper HP sensor did not detect the 1st stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: MPC 2551 SC799

              This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

              Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


              Paul@justmanuals.com

                Comment

                Previous template Next
                Working...