First Copy.JPGSecond Copy.JPGThird Copy.JPG
I just purchased a used FW760 with a meter of 76,170. The seller assured me that the image quality was clear and ran one test print to prove it. The test print was of a good quality with no streaking or ghosting. During the move the toner cartridge leaked and prevented the machine from starting. I removed the power switch and vacuumed it and the cover sensor switch above it. The copier started right up. I ran the first copy and it was splotched with light areas. I replaced the toner tube with a new one. Ran a copy which was very dark. I vacuumed the toner tray clean and ran another copy (see First Copy on left attached). This copy was legible but had a lot of ghosting and some light toner streaks. The second copy (middle attached) had more ghosting and way more toner streaks. The third copy (right attached) was even worse. I ran 10 copies with each one getting progressively worse. Does anyone know what the problem is? I have a spare drum from my other machine that is in fair condition (clear with one toner streak present on all copies). I would like to know if you think it is wise to call a tech to repair this machine or just call it a loss. I paid $450 for this machine which was a "bargain". I have a feeling that I was taken for a ride. The seller insists that the machine worked flawlessly for him and that something happened to it in transit. I am in Orange County, NY if someone out there knows of a reputable local tech, please let me know. Thanks!
I just purchased a used FW760 with a meter of 76,170. The seller assured me that the image quality was clear and ran one test print to prove it. The test print was of a good quality with no streaking or ghosting. During the move the toner cartridge leaked and prevented the machine from starting. I removed the power switch and vacuumed it and the cover sensor switch above it. The copier started right up. I ran the first copy and it was splotched with light areas. I replaced the toner tube with a new one. Ran a copy which was very dark. I vacuumed the toner tray clean and ran another copy (see First Copy on left attached). This copy was legible but had a lot of ghosting and some light toner streaks. The second copy (middle attached) had more ghosting and way more toner streaks. The third copy (right attached) was even worse. I ran 10 copies with each one getting progressively worse. Does anyone know what the problem is? I have a spare drum from my other machine that is in fair condition (clear with one toner streak present on all copies). I would like to know if you think it is wise to call a tech to repair this machine or just call it a loss. I paid $450 for this machine which was a "bargain". I have a feeling that I was taken for a ride. The seller insists that the machine worked flawlessly for him and that something happened to it in transit. I am in Orange County, NY if someone out there knows of a reputable local tech, please let me know. Thanks!
Comment