Aficio 2035 sc 353

[Ronan]

Hello, I have a problem with a machine that runs the code SC 353, and clean the ID sensor and put a new developer and continues with the same, any ideas? regards

[JustManuals]

Re: Aficio 2035 sc 353

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[blazebusiness]

Re: Aficio 2035 sc 353

Hello, I have a problem with a machine that runs the code SC 353, and clean the ID sensor and put a new developer and continues with the same, any ideas? regards

When you say new developer , do you mean the whole developer unit or just the powder. If you just replaced the powder......check gears on dv unit. Could be worn. What's the meter on that copier?

[cleardata]

[Ronan]

Re: Aficio 2035 sc 353

Change the units to another machine and there was no problem, I think it is in the sensor or the main board. I'll keep trying and will let you know. thank for the tips

[blazebusiness]

Re: Aficio 2035 sc 353

Change the units to another machine and there was no problem, I think it is in the sensor or the main board. I'll keep trying and will let you know. thank for the tips

Goose Guide on that model lists 4 fixes for that code:

ID sensor current error - poor or no drum ground ID sensor current error - clean and reinitialize ID sensor with SP3-001-2 ID sensor current error - replace ID sensor ID sensor current error - replace IOB

[Ronan]

Re: Aficio 2035 sc 353

I fix it. sensor was broken. change it and it worked. thanks