Scanned image crooked

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kayjaig
    Trusted Tech
    • Jan 2009
    • 144
    #1

    [CQ] Scanned image crooked

    I work on Aficio 2035, scanned image crooked in both ADF and platen glass. I wonder is there a way to adjust the scanner for this machine. Please advice. Thanks.
    Tags: None
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      Re: Scanned image crooked

      This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

      Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

        Comment

        • BLADE
          former propeller tester

          250+ Posts
          • Dec 2009
          • 478
          #3
          Re: Scanned image crooked

          grab the front corner of the scanner and lift it as hard as you can for a few seconds

            Comment

            • mikadonovan
              Senior Tech

              Site Contributor
              2,500+ Posts
              • May 2008
              • 2931
              #4
              Re: Scanned image crooked

              Originally posted by BLADE
              grab the front corner of the scanner and lift it as hard as you can for a few seconds
              That's right. People use the left front of the machine as a leaning post which causes the scanner to sag. A good yank up on it usually takes care of it.
              NEVER ASSUME ANYTHING

                Comment

                Previous template Next
                Working...