Ricoh Aficio 250 "Reset Fusing Unit"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • legaspiclg
    Technician

    50+ Posts
    • Oct 2011
    • 72
    #1

    [Misc] Ricoh Aficio 250 "Reset Fusing Unit"

    Hi,
    Good day, just want to ask how to reset the FUSING UNIT on Ricoh Aficio 250. I just replaced the fusing unit, but there is a message that says "reset fusing unit"?
    Please help.
    Many thanks.
    Cesar
    Tags: None
    • femaster
      Service Manager

      1,000+ Posts
      • May 2011
      • 1504
      #2
      Re: Ricoh Aficio 250 "Reset Fusing Unit"

      I believe that error means that the machine can't detect the fusing unit. Generally this indicates that it's either not installed correctly, or perhaps the wrong fusing unit was installed.

      Most likely it's not installed correctly, or fully. Verify that it's pushed fully into the machine, and that the electrical connector in the back is making good contact into the socket in the back of the machine.

      There is no "reset" for the fusing unit on these that I'm aware of, or can I find in the service manual.
      A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
      My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: Ricoh Aficio 250 "Reset Fusing Unit"

          This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

            Comment

            • sandmanmac
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Feb 2009
              • 3981
              #4
              Re: Ricoh Aficio 250 "Reset Fusing Unit"

              Originally posted by femaster
              I believe that error means that the machine can't detect the fusing unit. Generally this indicates that it's either not installed correctly, or perhaps the wrong fusing unit was installed.

              Most likely it's not installed correctly, or fully. Verify that it's pushed fully into the machine, and that the electrical connector in the back is making good contact into the socket in the back of the machine.

              There is no "reset" for the fusing unit on these that I'm aware of, or can I find in the service manual.
              I agree, I'm sure the message is actually "Re-seat the fusing unit".

              As stated above, I think I remember that the rear receptacle for the fuser is somewhat easily bent, and dislodged. Remove the rear cover and check that the fuser receptacle is in the proper location. And also, make sure you're not using an Aficio 200 fuser by mistake, that might account for the message you're getting

                Comment

                Previous template Next
                Working...