If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
new mfp's that have the NIC preinstalled at the manufacturer are shipped, they are now setting sp5985-1 to "2". This allows printing and pinging but blocks access to the WIM. You will have to set it to "1" if your setup people miss it.
I was not aware of that either, why the heck would they do that? (Rhetorical question, I know they didnt check with you first).
sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Comment