Hello Guy'sI having problem with GX 3050n showing Replace ink cartradge for cyan!Afer I replaced it with a new one, its show a new ink only for about 2 sec. and them a massage INK DEPLETED displayed for anoyher 2 sec. after its showing again Replace ink cartradge. the chip is reset even I put a used ing its reset the chip and cannot be used with other machine. is there any work around for the chip to be read as new again?If any body of you guy's incounter this problem, please give an idea !Thank you in advance!
-
-
Re: GX 3050N depleted ink
Ink related message on the LCD panel is incorrect (French only)
The French message on the LCD panel indicates to replace or set all 4 ink cartridges whereas only one or some of them are depleted, near end, or not set. Also, display on LCD at the printer mode is garbled when the ink cartridge is in the "Ink near end" condition. Why is this?
Cause: Firmware bug
Solution: Update firmware to the latest version(Package Ver.1.17 or later).
You can download the latest firmware from the Download page.
Symptom: The ink cartridge related message which is displayed on the LCD panel is incorrect for French.
Workaround: Use Status Monitor or Web Image Monitor to check the remaining ink.
Status Monitor
Web Image Monitor
Comment