Sc-390 on gestentner DSM 620d

[jake24482]

Re: Sc-390 on gestentner DSM 620d

Problem solved I made about 30 sky shot and initialize developer again and that all it took . i had to turn of the machine three time because it was popping the code on very 8 or 9 copies
well machine is working fine know
thanks to every one who reply to this thread
thanks a lot

[Herostrat]

Re: Sc-390 on gestentner DSM 620d

I had that SC on MP3045 after cleaning mag roller during service,it turned out that wery light piece of wire was atached to mag roller,at the spot above TD sensor.
I didn't notice that stright away because developer and toner were cowerinng it.
After wire was removed machine started working like a charm.