i worked in machine about 5 years yesterday it pop up sc440 can some help how can i fix main motor notice: it's appeared immeditly when i open machine. i ecountred this threat in machine 2045 but in feed motor but it was rolling but his torque is very weak.need help.thanks
-
-
Re: sc440
ya habibi what machine model you are reffering about your SC 440?fix the customer first then fix the machine... its simple and makes life more easy.
-
Re: sc440
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comComment
-
Re: sc440
One of the PCUs has seized.
This is a guess, of course, as we don't know what model of machine it is.
Also, still waiting for that apology...Comment
-
Re: sc440
Vargue, you back for some more. It is I, blah, blah, blah wine man. Give us that model, it is on the front cover.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
Re: sc440
hows this.............................................. ............................
استبدال الأسلاك تهمةsigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
Re: sc440
machine is 1045Comment
-
Re: sc440
Go into SP mode and run the motors in output mode - see what doesn't work.Comment
-
Re: sc440
my question is too obviouse i would ask about main motor maintenance. in aficio1045Comment
-
Re: sc440
If you have run the main motor in output mode with it hanging out of the machine and it doesn't work, replace it.Comment
-
Re: sc440
main motorrrrrrrrrrrrrrr.Comment
-
Re: sc440
I'm going to go with one of the following:
1) You are very stupid
2) You are very annoying
3) A combination of 1 and 2.Comment
-
Re: sc440
wow nice tryComment
Comment