nasuatec aficio mpc3000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Naveed Shahid
    Trusted Tech
    Site Contributor
    100+ Posts
    • May 2008
    • 162
    #1

    [CQ] nasuatec aficio mpc3000

    Hello every one

    I am facing a problem in mpc3000 machine not detecting network controller board machine have already network board but not showing in the service mode they showing copy sp fax sp but print sp not showing i cant print
    Can any one give me solution


    Thanks
    Tags: None
    • teebee1234
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jul 2008
      • 1670
      #2
      Re: nasuatec aficio mpc3000

      Is the Print/Scan SD card in slot 1 of the controller, and if so make sure it is fully seated (push it in, will click in place. Push again, will eject it).

        Comment

        • slot
          Trusted Tech

          250+ Posts
          • Jul 2008
          • 341
          #3
          Re: nasuatec aficio mpc3000

          check sp 5985 is set to 1 nib on

            Comment

            Previous template Next
            Working...