[Error Code] SC-551 on Nashuatec MP C2550

[certifiedxeroxtech]

Please share the best solutions as the error keeps coming back.

[rsyarcia]

Re: SC-551 on Nashuatec MP C2550

if it's intermittent better change the themistors. make sure that the machine is connected to a power source that has no fluctuation.

[JustManuals]

Re: SC-551 on Nashuatec MP C2550

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[kyrenecopy]

Re: SC-551 on Nashuatec MP C2550

Replace all thermistors, replace thermostats, clean male and female fuser plugs and reseat numerous times, make sure fuser roller is not bad and causing premature toner buildup on thermistors. Make sure you have a dedicated line for the machine and no serious power problems.

[Gift]

[sharpmind]

Re: SC-551 on Nashuatec MP C2550

if it's intermittent better change the themistors. make sure that the machine is connected to a power source that has no fluctuation.

I agree with Mr. Yarcia's comment. I would suggest to connect the machine to a voltage regulator to regulate the power supply. If your machine is connected to an extension cord, and several devices are sharing with it, most probably you will encounter fusing error because the CURRENT required by the machine has not been reached.

[certifiedxeroxtech]

Re: SC-551 on Nashuatec MP C2550

so far, the best possible way i did is plug the unit to AVR...Thanks folks
of course i replaced all the thermistors and thermostat twice in a month...