MPC 3500 FAX

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • mikadonovan
    replied
    Re: MPC 3500 FAX

    Thanks for the replies, changes to that sp didn't work for me. I bucked up and just dropped the 9 from the address book entries at the machine panel. Once I got into the rhythm it moved right along. Took me less than an hour.

    Leave a comment:


  • KenB
    replied
    Re: MPC 3500 FAX

    It's SP-3103-002, to be exacct.

    Please check out the attached image from the service manual:

    1.jpg
    Last edited by KenB; 08-25-2012, 03:41 AM.

    Leave a comment:


  • nmfaxman
    replied
    Re: MPC 3500 FAX

    PABX system.
    Check fax sp3103.
    Page 52 in fax service manual.

    Leave a comment:


  • Llama God
    replied
    Re: MPC 3500 FAX

    Originally posted by nmfaxman
    I think it is a user function to set for PBX systems to dial a 9 for outside line.
    I think so too.

    Leave a comment:


  • nmfaxman
    replied
    Re: MPC 3500 FAX

    I think it is a user function to set for PBX systems to dial a 9 for outside line.

    Leave a comment:


  • mikadonovan
    started a topic MPC 3500 FAX

    MPC 3500 FAX

    When I log into the WIM and check the address book fax destinations, there is no "9" before the number. When I look at the machine op panel fax destinations, there IS a "9" before the number. I want to get rid of the "9". Is it a bit switch setting? I am having trouble finding it, and I would rather not have to reprogram a million fax numbers if I don't have to.
Working...