MPC2051 SC819

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • katash
    Trusted Tech
    • May 2010
    • 221

    [Error Code] MPC2051 SC819

    Hi guys,
    another one for your input,a new mpc2051 showing sc819,any thoughts a part from upgrading the firmware?
  • zed255
    How'd ya manage that?

    1,000+ Posts
    • Dec 2009
    • 1025

    #2
    Re: MPC2051 SC819

    Any other codes occurring in the SMC report? Could be controller, RAM or HDD for starters. Had a follow-up today with an MPC2051 throwing SC990, 997, 819, 899, and 865's. Prior tech replaced the controller but the HDD seemed to fix it.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9919

      #3
      Re: MPC2051 SC819

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • jonhiker
        Senior Tech

        500+ Posts
        • Apr 2010
        • 661

        #4
        Re: MPC2051 SC819

        Try reformatting the hard drive. if the code returns, replace the hdd

        Comment

        • katash
          Trusted Tech
          • May 2010
          • 221

          #5
          Re: MPC2051 SC819

          Originally posted by jonhiker
          Try reformatting the hard drive. if the code returns, replace the hdd
          thanks guys, had reset the hdd but will replace it

          Comment

          • katash
            Trusted Tech
            • May 2010
            • 221

            #6
            Re: MPC2051 SC819

            Originally posted by zed255
            Any other codes occurring in the SMC report? Could be controller, RAM or HDD for starters. Had a follow-up today with an MPC2051 throwing SC990, 997, 819, 899, and 865's. Prior tech replaced the controller but the HDD seemed to fix it.
            thanks zed255!
            the HDD did it,its working fine,
            i appreciate

            Comment

            Working...