If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Press roller bushings and seps. I've also doubled up the sep springs before but it reduces the life of the top roller. Try a ream of better quality paper aswell.
You can 'reform' the silver sep claw holders so the claws can't move away from the hot roller, you'll never get another fuser wrap. Not too much though or you'll wear the hot roller quicker.
You can 'reform' the silver sep claw holders so the claws can't move away from the hot roller, you'll never get another fuser wrap. Not too much though or you'll wear the hot roller quicker.
I do that "mod" to every 1600/2000 fuser .....even if I'm there for any reason other than jamming.
If you do that mod you'll never see another fuser pawl pop out.
Comment