2105 with sc495

[T911]

I cant get rid of it. Cleaned all the hoses pump hopper and changed develooer. Ran the pump toner motor all work. Is there a sensor to look for. I kniw the 2075morning has the one at the middle rear of machine. Thanks

[kyrenecopy]

Re: 2105 with sc495

This is from the service manual. Maybe it will help

[JustManuals]

Re: 2105 with sc495

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Bantams]

Re: 2105 with sc495

the sensor on the toner recycle mech is dirty I usually change the unit complete

[Butrus]

Re: 2105 with sc495

Does the dev unit turn ok?
Shot Bearings on mag.rollers can cause the sc495 too...

[josueol1]

Re: 2105 with sc495

make sure the spiral that leads toner toner bank until the crystal cup is not twisted or obstructed toner.

[Masterchief]

Re: 2105 with sc495

the sensor on the toner recycle mech is dirty I usually change the unit complete

I agree and make sure the unit is clean and hoovered out.

[PinevskiS]

Re: 2105 with sc495

I cant get rid of it. Cleaned all the hoses pump hopper and changed develooer. Ran the pump toner motor all work. Is there a sensor to look for. I kniw the 2075morning has the one at the middle rear of machine. Thanks

Repalce the B234 3260 Pump Unut it hardly turns.