2105 with sc495

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • PinevskiS
    replied
    Re: 2105 with sc495

    Originally posted by T911
    I cant get rid of it. Cleaned all the hoses pump hopper and changed develooer. Ran the pump toner motor all work. Is there a sensor to look for. I kniw the 2075morning has the one at the middle rear of machine. Thanks
    Repalce the B234 3260 Pump Unut it hardly turns.

    Leave a comment:


  • Masterchief
    replied
    Re: 2105 with sc495

    Originally posted by Bantams
    the sensor on the toner recycle mech is dirty I usually change the unit complete
    I agree and make sure the unit is clean and hoovered out.

    Leave a comment:


  • josueol1
    Guest replied
    Re: 2105 with sc495

    make sure the spiral that leads toner toner bank until the crystal cup is not twisted or obstructed toner.

    Leave a comment:


  • Butrus
    replied
    Re: 2105 with sc495

    Does the dev unit turn ok?
    Shot Bearings on mag.rollers can cause the sc495 too...

    Leave a comment:


  • Bantams
    replied
    Re: 2105 with sc495

    the sensor on the toner recycle mech is dirty I usually change the unit complete

    Leave a comment:


  • JustManuals
    replied
    Re: 2105 with sc495

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Leave a comment:


  • kyrenecopy
    replied
    Re: 2105 with sc495

    This is from the service manual. Maybe it will help
    Attached Files

    Leave a comment:


  • T911
    started a topic 2105 with sc495

    2105 with sc495

    I cant get rid of it. Cleaned all the hoses pump hopper and changed develooer. Ran the pump toner motor all work. Is there a sensor to look for. I kniw the 2075morning has the one at the middle rear of machine. Thanks
Working...