ricoh aficio 2232c

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RWAFA
    Technician
    • Aug 2011
    • 68

    #1

    ricoh aficio 2232c

    hi guy,i have my ricoh aficio 2232c color copier whiuch is not copying,if i press start button the machine does not copy but gives a msg of copping but does not produce the copy,does any 1 knows wht it could be? plz help im stranded.,
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: ricoh aficio 2232c

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • rthonpm
      Field Supervisor

      2,500+ Posts
      • Aug 2007
      • 2847

      #3
      Re: ricoh aficio 2232c

      On each function of the machine, press the yellow Clear button and the red Stop button at the same time. When you reach the function that's locked waiting for a prompt you'll hear the fans and lasers start up again. Rebooting the machine will do the same thing, but that's usually a good starting point.

      Comment

      • cva
        Technician
        • Jul 2012
        • 23

        #4
        Re: ricoh aficio 2232c

        bro try change fusing unit,, more probly thermisters problem other else firmware or hdd

        Comment

        • George J
          Trusted Tech

          100+ Posts
          • Nov 2010
          • 107

          #5
          Re: ricoh aficio 2232c

          +1 for the fuser

          Comment

          • Eric1968
            Service Manager

            1,000+ Posts
            • Jan 2009
            • 2458

            #6
            Re: ricoh aficio 2232c

            If the Fusing Unit is the problem the machine would throw SC-codes.

            Comment

            • cva
              Technician
              • Jul 2012
              • 23

              #7
              Re: ricoh aficio 2232c

              im had face these case but not have any error code shown. finally im chang the fusing unit. i got solve the problem. later i check the fusing unit>>>> 1 thermal fuse its out of order.

              Comment

              Working...