Noise on adf mpc300

[duane@pbbsinc.com]

I have a squeeking noise on my ADF the feed assy and sep assy did not seem to fix it. It does not happen all the time.
I was just curious if there is an inherited problem with this model with a ADF noise.
I greased and lubed every thing i can see has movable parts.
My hunch is it is the sep assy. Is there an ajustment or something.

[rthonpm]

Re: Noise on adf mpc300

Have you tried a new sep roller? most of the time I've found that will kill any squeaky sounds.

[femaster]

Re: Noise on adf mpc300

Have you tried a new sep roller? most of the time I've found that will kill any squeaky sounds.

Same here. Is the squeaking is most noticeable when doing duplex copying? If so, I'd second the Sep Roller.

[kannuki2]

Re: Noise on adf mpc300

I believe it's the top cover of the DF is causing the noise. I put an insulation pad on the operator side and rear side of where the cover engage. See if it helps.

[sasa12u]

Re: Noise on adf mpc300

Try to change the feeder belt.//