If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I was just performing maintenance installing new drum unit and when I closed the doors the message stayed on the display to close door as shown but there is no
open door displayed . I opened and closed each door and watched as the display showed me that the doors were actually opening and closing . But still it displays the message to close door as shown but no door is open . What did I do to create this problem ?
Hi
Please make sure that one of the interlock switch actuator is not broken try to check them using interlock switch cheater tool
Comment