MPC4500 Mark on Page

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrfuser
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2007
    • 1598
    #1

    MPC4500 Mark on Page

    Client running a lot of fill on a newsletter. It is making a random crinkling looking mark on the page.

    Fuser, transfer, drums all look good.

    Running decent hammermill paper.

    Any thoughts?

    Kelly

    MPC4500Smudge.pdf
    Tags: None
    • sharpmind
      Trusted Tech

      250+ Posts
      • Sep 2009
      • 478
      #2
      Re: MPC4500 Mark on Page

      I would try to increase the fusing temperature to obtain good fusing of image..

        Comment

        • TonerMunkeh
          Professional Moron

          2,500+ Posts
          • Apr 2008
          • 3865
          #3
          Re: MPC4500 Mark on Page

          Change the paper type in the tray to Middle Thick or Thick 1, that will slow the machine down and make sure the image is fused correctly.
          It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

          Hit it.

            Comment

            • sandmanmac
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Feb 2009
              • 3964
              #4
              Re: MPC4500 Mark on Page

              couldn't hurt to try a new oil roller, and cleaning roller

                Comment

                Previous template Next
                Working...