[Error Code] SC 670 MP8001

[katash]

Hi guys,

i need your input and help!

the above MFP gives a silent sc670 whenever the copier is not operating or goes to energy saver,

indicates restarting then the usual reboot process.i have updated both system/copy and engine firmware but the fault is re-occur rent,any fresh ideas would be very valuable,

kind regards.

[Max]

Re: SC 670 MP8001

Re fit every connector on bicu/controller 1st see if that helps

[Zeldaman]

Re: SC 670 MP8001

Hi there!
You can also try to format the HDD.
Greetings...

[kannuki2]

Re: SC 670 MP8001

Yup I would backup the address book before start the SP5832-1. Also, 'lock print' jobs can cause this problem too. I would use SP5801-4 to free up the memory application in the machine.

[katash]

Re: SC 670 MP8001

thanks for the response,did check the connectors,will see about the hard disk formatting and will let you know,