SC503 paper bank cassette

[collme]

Re: SC503 paper bank cassette

The tray is level and it does not attempt to move paper from left to right as sc code appears before it tries to. the main puzzle is the fact the machine sees the left deck is empty if i don't put paper in so it will not attemp to push the stack over, yet it still throws the 503 when the right deck empties of paper and lowers the plate. It shows all paper detect sensors are working perfectly and no paper in the connector, all mechanical parts are working correctly with the tray lifting and lowering when it should do, just the fact it seems to not reconise when the tray has hit the lower limit. Debs theory is the closest i have to explain what it could be but the tray is level. got senior tech (was tech spec) coming in on monday with me so hope to sort it

[Bantams]

Re: SC503 paper bank cassette

Sounds like the deck isn't lowering fast enough it as a time limit to get from a-b you know Just like us techs Anyway don't have nightmares this w/e about it im sure Mr Barker or whoever turns up Fixes the problem with you

[collme]

Re: SC503 paper bank cassette

Got mr Wilkinson coming but it does seem to be lowering to slow in theory. have a lift motor on order as it looks to control the lowering as well, tray is braked for when deck is pulled out but motoer controlled when lowering due to paper out status. will keep you informed on Monday. love the odd ones but it is now an rtf on top of an rtf, not good for my stats lol

[Debs1964]

Re: SC503 paper bank cassette

Yes, please remember to let us know, I'm curious. I'll have to look at your stats, see how good you are LOL x

[mikadonovan]

Re: SC503 paper bank cassette

I don't know if this is helpful, but have you checked the connectors those drawers plug into on the machine to make sure there isn't like a wad of paper in them or something?

This is excellent advice. I've had this happen more than once.

[collme]

Re: SC503 paper bank cassette

Yes, please remember to let us know, I'm curious. I'll have to look at your stats, see how good you are LOL x

very bad in March but not to bad this month, look at quart figures as had a really bad month last month lol.

[glyn545]

Re: SC503 paper bank cassette

very bad in March but not to bad this month, look at quart figures as had a really bad month last month lol.

Don't take any notice of stats, they don't mean diddly, there just a tool to beat us up with.

[myxer1234]

Re: SC503 paper bank cassette

If the drive gear on the left side isn't the problem it's probably the front end fence on the right side.

[collme]

Re: SC503 paper bank cassette

Was lift motor, raising ok but must have had some lag when lowereing so it did not quite get to lower limit quick enough. Was only a matter of millimeters short of reaching the sensor though. new lift motor and away she went.

[Bantams]

Re: SC503 paper bank cassette

Glad you fixed it but I did kinda say it was that when I said it wasn't getting from a-b fast enough