LD230 or AF3030

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RicohTech
    Technician
    • Oct 2007
    • 30
    #1

    LD230 or AF3030

    Getting SC322 code w/red wrench. The copies are grey background and some have white lines going down page (in portrait mode as the paper is fed with in long edge). The letters are elongated and looks enlarged. The few times I can print, I can get completely dark pages looks like sky shot, other times, white page out... everything is intermittent. As the days go by (about a week now), seems like the problem is happening more and more. Not able to print smc report. Also getting box that has the little squares on bottom it's trying to reset... nothing happens, must toggle switch off and on.

    Replaced the LD unit, laser sync board and also the SBMC board. Nothing has changed. Checked 5v at switch.... that is as far as I got.

    Any ideas appreciated!
    Tags: af3030, grey background, ld230, off, ppm, rebuildable, sbcu, symptoms
    • Scott_Lewis
      Senior Tech

      500+ Posts
      • Mar 2007
      • 519
      #2
      Originally posted by RicohTech
      Getting SC322 code w/red wrench.

      Replaced the LD unit, laser sync board and also the SBMC board. Nothing has changed. Checked 5v at switch.... that is as far as I got.
      Since you have already replaced the SBCU (SBMC?) board, I would swap out the IPU. Sure sounds like a image/printing processing problem.

        Comment

        • iMind
          Vacuum Cleaning Expert

          1,000+ Posts
          • Mar 2008
          • 1116
          #3
          Originally posted by RicohTech
          Getting SC322 code w/red wrench. The copies are grey background and some have white lines going down page (in portrait mode as the paper is fed with in long edge). The letters are elongated and looks enlarged. The few times I can print, I can get completely dark pages looks like sky shot, other times, white page out... everything is intermittent. As the days go by (about a week now), seems like the problem is happening more and more. Not able to print smc report. Also getting box that has the little squares on bottom it's trying to reset... nothing happens, must toggle switch off and on.

          Replaced the LD unit, laser sync board and also the SBMC board. Nothing has changed. Checked 5v at switch.... that is as far as I got.

          Any ideas appreciated!
          In my point of view there is something stoping the drum from rotating thats why you´re getting black copies and stretch "Enlarged Letters" check PCU unit and or drive
          Last edited by iMind; 04-14-2008, 11:57 AM.
          sigpicWe can all Win, but at the end we all loose. Save the greyhound

            Comment

            • cobiray
              Passing Duplication Xpert

              1,000+ Posts
              • Mar 2008
              • 1199
              #4
              Check the flywheel and make sure it's not loose. Haven't had this issue on the smaller machines, but the 60ppm machines have the screw back out.
              the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
              Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
              Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

                Comment

                • DocF
                  Old Retired IKON Drudge
                  • Apr 2008
                  • 41
                  #5
                  If this is like the older machines, there is a plastic gear in the drum drive that has a flat in the center to drive it. This strips out. The symptoms you describe are consistent with that.

                  Doc

                    Comment

                    • rthonpm
                      Field Supervisor

                      2,500+ Posts
                      • Aug 2007
                      • 2847
                      #6
                      Try replacing the PCU assembly with one from a 1022. The gears on the rebuildable ones seem to lock up and wear fairly quickly.

                        Comment

                        • FRIDGEMAGNET
                          Trusted Tech

                          250+ Posts
                          • Aug 2007
                          • 377
                          #7
                          Try checking the data cable from the IPU to the laser unit, bent pins etc.
                          These can cause all sorts of wierd problems like this.

                            Comment

                            Previous template Next
                            Working...