[Jamming] Bad separatin MPC4000

[Bole]

Hi,
do you have any problem with separation in fusing unit when you copy full covered color duplex copy? The copy paste aroun hot roller. Fusing unit is on 41% of life time and it's look in good condition. It is evident that I have problem with separation but I don know what can I do? Do you know any solution?

THNX

[Max]

Re: Bad separatin MPC4000

Full colour 100% coverage double sided will never come out. (i dont know any copier that will) Single sided will jam 9 times out of 10. Unless you have at lest 4 cm of erase on lead and trail edge it will keep jamming. What you can try is 120 gsm paper witch will resist the curl a lot more, but printing d/s on it might be difficult .

[Bole]

Re: Bad separatin MPC4000

Im afraid you are right Max. But I realy want to find solution for my costumer.

[Max]

Re: Bad separatin MPC4000

the only way would be to have a huge erase or use over sized paper then use guillotine to trim to A4 or what ever size they are using.

[mikadonovan]

Re: Bad separatin MPC4000

A full bleed print is more trouble than it's worth. A substantial lead edge void area is necessary to avoid problems like yours.

[TonerMunkeh]

Re: Bad separatin MPC4000

The solution is elegantly simple actually.... sell them a machine that can tackle full bleed, like a Pro C751, not an office colour MFP.

[Bole]

Re: Bad separatin MPC4000

Yes of course, how much it cost

[bradj]

Re: Bad separatin MPC4000

Hi,
do you have any problem with separation in fusing unit when you copy full covered color duplex copy? The copy paste aroun hot roller. Fusing unit is on 41% of life time and it's look in good condition. It is evident that I have problem with separation but I don know what can I do? Do you know any solution?

THNX

Try printing/ copying on a thicker mode.. thick 3 is the best.. slows down the machine enough that fusing isn't a problem... most effective on full color duplex..

[Bole]

Re: Bad separatin MPC4000

Thank you 'Bradj' you are the man! This is the answer that I expected! I'll try to do this.

[SargeNZ]

Re: Bad separatin MPC4000

I don't know if the 4000 will duplex thick 3. The paper/card would be too stiff to get around the U bend.

[kannuki2]

Re: Bad separatin MPC4000

Cannot duplex if its on thick 1. You can duplex with middle thick setting but not sure if full bleed will work