MPC 300 SC240

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TonerMunkeh
    Professional Moron

    2,500+ Posts
    • Apr 2008
    • 3865

    #16
    Re: MPC 300 SC240

    Make sure you fit the modification too otherwise it'll just do it all over again. M026 9904.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

    Comment

    • nkot^1
      Technician
      • Sep 2013
      • 17

      #17

      Comment

      • sandmanmac
        Field Supervisor

        Site Contributor
        2,500+ Posts
        • Feb 2009
        • 3981

        #18
        Re: MPC 300 SC240

        Originally posted by TonerMunkeh
        Make sure you fit the modification too otherwise it'll just do it all over again. M026 9904.
        I've just had this code pop up on a machine myself, and am away for a few days and unable to attend the call.
        I have someone that can fit an LD unit for me, which sounds like the main problem.
        My question is:
        "Should" that resolve the problem temporarily (for a week or so) until I can get back and fit the Modification, or is the Power supply typically damaged and will take out the LD unit right away?

        ALSO..any chance it coould just be a k- PCU? It is actually a bit overdue for one

        Thanks!

        Comment

        • mikadonovan
          Senior Tech

          Site Contributor
          2,500+ Posts
          • May 2008
          • 2931

          #19
          Re: MPC 300 SC240

          Originally posted by sandmanmac
          "Should" that resolve the problem temporarily (for a week or so) until I can get back and fit the Modification
          It should Sandy, it has for me. After eating the cost of a new LD unit a couple of times, I went ahead and put the mod on all my c300's in the field.
          NEVER ASSUME ANYTHING

          Comment

          • sandmanmac
            Field Supervisor

            Site Contributor
            2,500+ Posts
            • Feb 2009
            • 3981

            #20
            Re: MPC 300 SC240

            Originally posted by mikadonovan
            It should Sandy, it has for me. After eating the cost of a new LD unit a couple of times, I went ahead and put the mod on all my c300's in the field.
            Thanks Mika!
            Replacing the LD unit has fixed it for now. I'll decide what to do when I get back.
            I had a parts machine to harvest from, but I'm also lucky that I live so close to a massive machine wholesaler that's very good to me when I need replacement parts like that.

            Comment

            Working...