[Misc] REX ROTARY PRO1357 EXP

[atech]

REQUIRED MAINTENANCE: FUSER-CLEANER. The machine was already replaced with web roller, but the message still appears on the display. Is there a way to reset this message? Please help....

[tcs04]

Re: REX ROTARY PRO1357 EXP

REQUIRED MAINTENANCE: FUSER-CLEANER. The machine was already replaced with web roller, but the message still appears on the display. Is there a way to reset this message? Please help....

Check the TCRU replacement guide.

[JustManuals]

Re: REX ROTARY PRO1357 EXP

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[FMC]

Re: REX ROTARY PRO1357 EXP

Had this and nothing worked at all. In the end I did an engine clear and it worked. Just make sure you print out an SMC data sheet just incase you need to refer to it for lost settings.

[Ollie1981]

Re: REX ROTARY PRO1357 EXP

Set 1-902 Web Counter back to "0"

Or I believe you can reset the web count in the SP screen for "Trained Users",

The message will still be displayed even if you have physically replaced the oil web as there is no mechanism for detecting how much is remaining, just a percentage indication in SP 1-902 based on page count since it was last zeroed.

[atech]

Re: REX ROTARY PRO1357 EXP

Had this and nothing worked at all. In the end I did an engine clear and it worked. Just make sure you print out an SMC data sheet just incase you need to refer to it for lost settings.

Sir I cant access to simulation. I think its looking for a key operator code. and asking me to log in... Do you know how to access to simulation? Could you give me the exact execution procedure to enter into Simulation.

[JustManuals]

Re: REX ROTARY PRO1357 EXP

Sounds like you need the manual