Savin C7570 please wait screen then sc 670

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xatrix
    Technician
    • Oct 2008
    • 27
    #1

    [Dead] Savin C7570 please wait screen then sc 670

    i have a customer that has this machine all im getting is the please wait screen when you fire up the machine then after about 5 mins the machine comes up with the sc 670 code. we have replaced the VBCU and the power supply board with no change. im not sure what else it could be we have already put over 3 grand worth of boards in it and im at a loss any help would be great
    Tags: None
    • Iowatech
      Not a service manager

      2,500+ Posts
      • Dec 2009
      • 3930
      #2
      Re: Savin C7570 please wait screen then sc 670

      Originally posted by xatrix
      i have a customer that has this machine all im getting is the please wait screen when you fire up the machine then after about 5 mins the machine comes up with the sc 670 code. we have replaced the VBCU and the power supply board with no change. im not sure what else it could be we have already put over 3 grand worth of boards in it and im at a loss any help would be great
      Overly long "Please wait" messages are normally caused by a defective hard drive. Have you tried disconnecting the hard drive from the controller and then rebooting the machine?

        Comment

        • sandmanmac
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Feb 2009
          • 3964
          #3
          Re: Savin C7570 please wait screen then sc 670

          Originally posted by Iowatech
          Overly long "Please wait" messages are normally caused by a defective hard drive. Have you tried disconnecting the hard drive from the controller and then rebooting the machine?
          Agreed. I'll wait for feedback from the poster on this one. i'm thinking that chances are good that this should have been asked just slightly sooner than spending $3000 on circuitry.

            Comment

            • CableGuy
              Impulse Drive Engineer

              250+ Posts
              • Oct 2008
              • 417
              #4
              Re: Savin C7570 please wait screen then sc 670

              wow, straight in there with the boards lol
              defo HDD

                Comment

                • xatrix
                  Technician
                  • Oct 2008
                  • 27
                  #5
                  Re: Savin C7570 please wait screen then sc 670

                  have disconnected the hdds. and have disconnected all accessories that is the very first thing i tryed sorry i didnt put that in the first post.it was something that i thought was such a normal thing to try i didnt put it in

                    Comment

                    Previous template Next
                    Working...