Reseting Page counter - Ricoh

[kelisa]

Hi guys,

I was wondering if the page counters could be reset. Some people said, one of the ICs need to be replaced. Thanks..

[jonezy999]

Re: Reseting Page counter - Ricoh

Of course, you can even fly the fucker to Mars if ya do enough work to it.

Jokes, no you cant.

[sdrawkcab]

Re: Reseting Page counter - Ricoh

Some people said

Get them to show you then.

[kelisa]

Re: Reseting Page counter - Ricoh

Of course, you can even fly the fucker to Mars if ya do enough work to it.

Jokes, no you cant.

Really cant? OK.

[kelisa]

Re: Reseting Page counter - Ricoh

Get them to show you then.

If they will show me, then I 'd know the secret already. They wont show...

[TonerMunkeh]

Re: Reseting Page counter - Ricoh

They won't, because it's fraud. It's like rolling back the odometer on a car.

[turbojetboy]

Re: Reseting Page counter - Ricoh

Hi guys,

I was wondering if the page counters could be reset. Some people said, one of the ICs need to be replaced. Thanks..

Just replace the black IC on the controller with a spare one from any old computer. Then fire up machine in meter clear mode and run the wipe routine from the console, reset the nic and your good to go.

[Gift]

Re: Reseting Page counter - Ricoh

with a spare one from any old computer.

[Bantams]

Re: Reseting Page counter - Ricoh

It Cant be Fraud because Ricoh do it to there Refurbished R Range machines............. Oh and yes you can do it but I aint telling its a trade Secret

[kelisa]

Re: Reseting Page counter - Ricoh

It Cant be Fraud because Ricoh do it to there Refurbished R Range machines............. Oh and yes you can do it but I aint telling its a trade Secret

I thought a forum is for people of same interest to share, but you aint telling, I cant blame you. Someone will. Thanks Bamtams..

[kelisa]

Re: Reseting Page counter - Ricoh

Just replace the black IC on the controller with a spare one from any old computer. Then fire up machine in meter clear mode and run the wipe routine from the console, reset the nic and your good to go.

Are you serious? Use any IC from any old PC? ....lol.

[kelisa]

Re: Reseting Page counter - Ricoh

Anyways guys, if its not safe to disclose trade secrets here, you can PM me. I am in the same trade.

To be specific, I am looking for answer to reset MPC3000.

I think resetting is not a fraud, we are not selling these machine as new machine, we sell them as remanufactured, and resetting is part of the service. Like replacing new drum and rollers or scanner.

[CableGuy]

Re: Reseting Page counter - Ricoh

Anyways guys, if its not safe to disclose trade secrets here, you can PM me. I am in the same trade.

To be specific, I am looking for answer to reset MPC3000.

I think resetting is not a fraud, we are not selling these machine as new machine, we sell them as remanufactured, and resetting is part of the service. Like replacing new drum and rollers or scanner.

No, it's fraud and dishonest, and that's not what this forum is about.... being dishonest. It is a forum for people of the same interest, i.e. helping each other give our customers the best possible service. Now go and bang your head on the ground until you are forgiven....

[turbojetboy]

Re: Reseting Page counter - Ricoh

Anyways guys, if its not safe to disclose trade secrets here, you can PM me. I am in the same trade.

To be specific, I am looking for answer to reset MPC3000.

I think resetting is not a fraud, we are not selling these machine as new machine, we sell them as remanufactured, and resetting is part of the service. Like replacing new drum and rollers or scanner.

Dude, we sell them fully recond also - and ALWAYS with the original low meter counts. We only refurb low vol machines. Quite frankly I think your prospective customers would be fine with that - ours are. 0 meter just looks wrong.

So just save yourself an enormous amount of stuffing around and keep the meters real. It's no big trade secret -it's simple a bloody nightmare - ESPECIALLY on a colour machine as you describe. But yes any old IC will do.

[Bantams]

Re: Reseting Page counter - Ricoh

We always put new counters on Refurbs due to it makes it easier for meter charge contracts. 1st of all you need to download the nvram data to a Sd card using sp5-824-001 then you need to replace the NVRAM b230 9590 then when the new nvram is in place reinstall on the new Nvram the data on the sd card using SP5-825-001. The Part Number for the NVRAM that is situated on the Controller Differs from machine models the one you need is the B230 9590 that's the same one on the MPC2000, 2500 and 3000 the MPC2800,3300,4000 and 5000 use D023-9590.... Don't forget to give me Rep points this message will self destruct when a mod feels the need to delete it :P