ricoh mpc2500 cannot doubleside printing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • karolushoky
    #1

    ricoh mpc2500 cannot doubleside printing

    my ricoh mpc2500 cannot print precisely doublesided... how to handle double sided printing precisely??? we don't take 1-2mm tolerance... 0,5mm ok...

    colour not consistent in mpc 2500... left side can be darker, or right side can be lighter... how to handle this problem?

    thanks...
    Tags: adjustmen, darker, doubleside, mcp, mpc 2500, mpc2500, printing, ricoh, ricoh mpc2500, tolerance, transfere
    • cobiray
      Passing Duplication Xpert

      1,000+ Posts
      • Mar 2008
      • 1199
      #2
      As for the double sided, enter the User Tools>Copy>Edit and make sure the 2nd side shift is set to zero.

      For the color issue, print single color copies from all the pcu's to determine if it's all colors or just one color. If it's all colors the ITB might need replaced. If it's a single color you could replace the drum unit or developer.

      All this is assuming the machine has had the PM items replaced on time. If it's not, you might want to try making sure the parts are replaced according to the PM cycle. After that run the color and line adjustments through the User Tools> Maintenance screen.
      the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
      Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
      Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

        Comment

        • banginbishop
          grumpy old git

          500+ Posts
          • Oct 2007
          • 894
          #3
          Faint one side

          I've had an inconsistent copy quality on the mcp. Mine was caused by the paper transfere/seperation unit not being in the right position - giving me an uneven grey down the sides on the Ricoh colour test chart.
          Incontinentia Buttocks

            Comment

            • Josh Moody
              Moodyman
              • May 2008
              • 24
              #4
              uneven color

              I believe that there is a TSB on removing the shutter on the laser unit. Check TSB #20. Good luck on the other problems

                Comment

                • johnny32
                  Trusted Tech

                  100+ Posts
                  • Oct 2007
                  • 102
                  #5
                  re light one side

                  have had this problem. Its caused by the laser shutter and their is a firmware update that solves the issue
                  tech bulletin rb230026
                  software ver 1.11.01 or higher

                    Comment

                    Previous template Next
                    Working...