-I had this machine that is making a non continuous squeeking(is this the spelling) sound.
-This not continuous sounds happens after it picked up...
39 results in 0.0121 seconds.
-
Paper Size Tolerance
What is the size tolerance for A4 paper?
I have a customer with a MP4500 that is constantly jamming using their letter head. The letter... -
C6500 Fuser issues
I have a Pro C6500 which has the "FIXING DRIVE GEAR /F 20T 28T" A03U808600 lossing its teeth once per fortnight. The fuser has been fully serviced... -
IR 3300
Good day
I have canon ir 3300 with E261 error
Replaced DC controller and Power supply board and same error.
Thanks. -
Random weird thoughts
I sometimes have random weird thoughts. Here is the latest.
What sick twisted mind decided it was a good idea to build the first two holer... -
Image Shift on bizhub C280
Hi All,
I have a bizhub C280 placed in an account where my customer is running labels.
The labels are glossy 10-up ovals.
... -
BH PRO C6500 Alignment Problem
Hi Guys,
I have a C6500 which seems to print the image at an angle on the page, which causes problems when printing back to back. 3 of the...Last edited by Grantow; 11-16-2010, 08:16 PM. -
FS-608 booklet folding skew
Got a bit of a strange fault on a FS-608 booklet folder. For some reason when folding a single sheet of A3 or A4 the fold line is either perfect, off... -
MP5000 SC553 Have tried everything we can think of!!!
Gday all,
Having an ongoing problem with only one MP5000 regarding fuser codes. Machine has around 340k on it. Have tried replacing all thermistors... -
ERROR F1-08
hello guys, i am about to go to a customer tomorrow that says there mx machine has a f1-08 problem, i think the error code has something to do with the... -
iR-c5180 fax problems
Hi, Fellows,
I have this c5180 with Fax-V1 and imagePass-H1.
Boot ROM v. 78.01
System v. 92.06
Printer v. 66.01... -
GR3770 Image alignment problems
Hi,
I've been experimenting with 2 colour printing on my gr3770 and I'm having real issues getting the alignment right. After I run a test... -
ir c3100 e0067-0100
service manual just states to repower machine, what is actually going wrong? it says primary transfer atvc is wrong. whaty does the atvc stand for? t... -
skew in 6501
Hai all,
2 mm skew is apperaing on my KM 6501 from 4th and 5th tray ,
i followed installation procedure no chance,
please...
