2045 Copy Problem need your help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bitzbytes

    #1

    [Misc] 2045 Copy Problem need your help

    What could be the problem on this sample image i attached my machine is a aficio 2045e. Anyone could help me, thanks in advance...

    2045 copy image.jpg
  • fritzyas
    Technician

    50+ Posts
    • Jul 2011
    • 73

    #2
    Re: 2045 Copy Problem need your help

    check if the drum unit and development need changing..

    Comment

    • cyberrtb

      #3
      Re: 2045 Copy Problem need your help

      if the toner rubbs off, its your fuser unit(no pressure)if its your drum unit or dev unit,check when last u replaced the developer and drum. sometimes just by takeing the drum unit and the dev unit out and in will help aswell. it could be on your transfer roller aswell that is situated on the right side door. also check your vsp /vsg for 4.5volt then if its not right then u know the problem can be with your drum and developer. hopes it helps

      Comment

      • totoro
        Senior Tech

        Site Contributor
        500+ Posts
        • Apr 2008
        • 568

        #4
        Re: 2045 Copy Problem need your help

        It almost looks like you have moisture in your paper. Run a few blank copies through the machine and put the paper back in the paper drawer and make a full page copy and see if it works. If it does then get new paper.
        Totoro

        Comment

        Working...