need some help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • luis8832
    Trusted Tech

    250+ Posts
    • Dec 2008
    • 250
    #1

    [Misc] need some help

    I have an Ricoh aficio MP 161. Used to work on ricoh's years ago, want to program the fax side of it and set up for smb scanning. If anyone has some input, a manual that i can use on programming this unit it would be helpful. Thank you all in advance for all your help.
    Tags: 161, aficio, ricoh, scan, scanning, set, side, smb, unit, work
    • rthonpm
      Field Supervisor

      2,500+ Posts
      • Aug 2007
      • 2847
      #2
      Re: need some help

      Manuals, Drivers, Software and Brochures Downloads | Ricoh-USA<

      User manuals can be found there. The MP 171 manual will also work as there's not much difference other than colour scanning and a few add-ons between the two models.

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37052
          #3
          Re: need some help

          Be aware, if you are going to use SMB scanning to Windows 8 or Server 2012, you will need to down load custom firmware from Ricoh.

            Comment

            Previous template Next
            Working...