Please wait!!!

[johnyb]

Make sure they are all the same make model and size too as a mismatch can cause them not to work, as previously discussed on las post format with spvonce in machine.

[skynetto]

Re: Please wait!!!

That means you have some problem with the HDD. As this unit has 4 HDD you have to format/replace the ones giving problems.
After replacing or formatting it on the PC you can reformat it in the machine with SP5 832.

[lary leon14]

Re: Please wait!!!

Hallo....the problem does not resolved...it keeps please wait,and i have change all the HHD"s,but the copier keeps please wait,and if i only take out the third HDD,it become in ready condition,without the signs of the duplex unit,and it does not make a copy,when you press the copy,it keeps please wait!....
Any advice????
Thank you!

[JustManuals]

Re: Please wait!!!

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[lary leon14]

Re: Please wait!!!

Thank you to all of you....the problem was one HDD,i will manage to change it .....and see the result.....
Thank you again!!!

[slimslob]

Re: Please wait!!!

If you can get in with WIM, see if you have an SC

[SteveF]

Re: Please wait!!!

Hi You could try formatting HDD ..defo hard drive issue

[zames77]

Re: Please wait!!!

Unplug the HDD's and reboot. If it comes to ready you know your drives have failed.

[lary leon14]

Hallo....i have a sign please wait,in a aficio color 5560.
Any advice???
Thank you!