[Electrical] SPC821DN - FU1 Fuse Blowing

[nobody-here]

We have a SPC821 with FU1 always blowing.
We cannot get out of this.
Fuser looks good.

Manual talks about IH Coil, but we've not so much experience on this machine. Need help!
Thanks a lot in advance.

[TonerMunkeh]

Re: SPC821DN - FU1 Fuse Blowing

Replace the main PSU and the IH coil PSU as a pair. That'll sort it.

[nobody-here]

Re: SPC821DN - FU1 Fuse Blowing

Thanks, do you mean D0294326 and AZ240193.
Do you think we also need to swap Invertor, we have still D0295172 as I read on this post. http://www.copytechnet.com/forums/ri...00-5000-a.html

Will cost more than 1.500€

Printer is much used, more than 600.000 color prints. At least 3 years old.
Maybe a new machine is a good solution..

Thanks