[Error Code] SC753 on an MP8001 with a SR4050 Finisher.

[JonManchester]

I need help trying to fix a SC753 code, i changed wiring harnesses and the finisher main board still no luck. Its a return roller motor code and not sure what that is, PLEASE HELP.

[JustManuals]

Re: SC753 on an MP8001 with a SR4050 Finisher.

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Llama God]

Re: SC753 on an MP8001 with a SR4050 Finisher.

I need help trying to fix a SC753 code, i changed wiring harnesses and the finisher main board still no luck. Its a return roller motor code and not sure what that is, PLEASE HELP.

More information would be good. Does it do it when you start the machine, or does it jam and then do it when you're using the finisher? Also, what EXACTLY is in the service manual for this code? That should give you a clue.

If you don't have a manual, of course, see above.