MPC5502 SC564

[spaceman99]

Hello

CAN YOU HELP ????

Have a mpc5002 with please wait and no fuser temperature increase and NO fuser error.
Removed HDD and formatted it and re installed, only to get SC564

Replaced pressure roller and Fuser film and still have it. Done SP 5801 - 01 and 02 still not working.

Ordered AC controller and complete fuser,,,,, do not want to fit them if i can help it
Has any one else had this and what was the fix

If you could advise all help well received.

[Debs1964]

Re: MPC5502 SC564

You will need to replace the complete fuser to reset this error code, reset using SP5-810-2, then switch machine off/on

[slimslob]

Re: MPC5502 SC564

According to TSB 009 the original fuser must be replaced with a new fuser from parts. One that has already been in another machine will not reset the code. According to TSB 022 there is now a replaceable fuse in the new fusing unit that can be replaced in the field. I don't know if wiring for the replacement fuse is in the original fusing unit but it is worth checking against TSB 022.

[Moza]

Hello

CAN YOU HELP ????

Have a mpc5002 with please wait and no fuser temperature increase and NO fuser error.
Removed HDD and formatted it and re installed, only to get SC564

Replaced pressure roller and Fuser film and still have it. Done SP 5801 - 01 and 02 still not working.

Ordered AC controller and complete fuser,,,,, do not want to fit them if i can help it
Has any one else had this and what was the fix

If you could advise all help well received.

When replacing the fuser sleve roller you shoul get a quick blow fuse with to enable you to perform the SP 810-02 reset ?

[zames77]

Re: MPC5502 SC564

Check this threads, it has all the info you need.

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/71447-mpc-3502-sc554-00-holy-sh.html