Re: mpc 4000 copy wraps around pressure roller
I think at our place of work that we are going to include the stripper plate as part of a fuser PM, since it is just a thin piece of metal with a "non-stick" coating that is supposed to be durable, but doesn't always last.
Note to self: do not run your finger along the edge of stripper plate!...it will cut the heck out of your fingertip!
I have a set of kids plastic handle nylon paint brushes and I use the plastic handle to run along the stripper plate to pop off the crusty toner and then use an alcohol pad to finish the job. Also check the entry guideplate for toner buildup and remove with alcohol on a rag, otherwise you can get drag marks on your copies!
I think at our place of work that we are going to include the stripper plate as part of a fuser PM, since it is just a thin piece of metal with a "non-stick" coating that is supposed to be durable, but doesn't always last.
Note to self: do not run your finger along the edge of stripper plate!...it will cut the heck out of your fingertip!
I have a set of kids plastic handle nylon paint brushes and I use the plastic handle to run along the stripper plate to pop off the crusty toner and then use an alcohol pad to finish the job. Also check the entry guideplate for toner buildup and remove with alcohol on a rag, otherwise you can get drag marks on your copies!

Comment