If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a Laqnier LD 230 showing an SC542 that I cannot clear. I have replaced the two thermistors and ran Mode 5810 tp do SC reset- but still cannot get it to clear- what am I missing?
Check the thermostat, had the same problem with a 2090...block the door switches an after the sc code reset turn on the machine and look if the fuser lamps work, if not, it's the thermostat
Comment