MP 6001 fuser lamp question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fshead
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2376

    #1

    MP 6001 fuser lamp question

    morning i am rebuilding a few low count mp6001 copiers"less than 500k" and have two with different placement of the 2 lamps..
    on one the lamps are on one side and the other they are on the bottom 2 holes..
    as you know they use the 3 hole bracket that the mp6500 used..
    \do i follow the color code or did someone or ricoh find a better placement.
    thnx
  • richwalker
    Technician
    • Mar 2013
    • 30

    #2
    Re: MP 6001 fuser lamp question

    The lamp holder bracket on the MP 6001 has only 2 holes for the lamps. I know the MP 5500/6500 and 6001/7001 are similar, but if the unit you are rebuilding has a bracket with 3 holes, it's the wrong bracket. Use the 2 bottom holes then if that's the case.

    Richwalker.

    Comment

    Working...