Savin 9050 Copier

[RonMac]

How do I add, delete and change the user code on a Savin 9050 that I am working on in the shop. It is not connected to a computer and the previous owner does not have the user code. Can I use a service code to over ride or bypass the user code? Thanks for any help. Ron

[ruben]

Re: Savin 9050 Copier

http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001033/0001033300/view/usertool/int/0145.htm

You can also bypass the codes by either turning them off in User Tools, or go to System/Copy SP then click on the Copy Window button.

[RonMac]

Re: Savin 9050 Copier

http://support.ricoh.com/bb_v1oi/pub...l/int/0145.htm

You can also bypass the codes by either turning them off in User Tools, or go to System/Copy SP then click on the Copy Window button.

Thank you Ruben....I will try that tomorrow. Ron

[RonMac]

Re: Savin 9050 Copier

Thank you Ruben....I will try that tomorrow. Ron

Thought you might like to know I was able to clear all the codes and found the NV Ram Chip had a bent leg. It's up and running. Thank you again and enjoy the holidays. Ron