If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi dear good morning i have ricoh mp7500 how can i update firmware , i have firmware but i don't know what is tha procedure.
what i will do plz anyone give ma idea.
hi dear good morning i have ricoh mp7500 how can i update firmware , i have firmware but i don't know what is tha procedure.
what i will do plz anyone give ma idea.
thanks
Copy the firmware to a folder named ROMDATA on the SD card.
From the manual:
Doing the Software Update Procedure
An SD card with the software downloaded to it is necessary for this procedure.
1. Turn the main switch off.
2. Remove the SD card slot cover [A].
3. Hold the SD card [B] (the surface with
printing must be away from the front of
the machine), and install the SD card
in Slot C3 [C].
4. Turn the main power switch on.
wait until firmware update comes on screen.
Then select the firmware needed to update and press update.
Wait until finished, power off the machine and remove the sdcard.
Comment