Just had a service call for cq . Gave the back of the machine a bit of a vac n dust . Now the machine is dead . The cooling fans run and the standby light is on but black display and no signs of warming up ! Any ideas ?
-
-
Re: MP9000 dead ( fans and standby light on )
I now when the small plug at the bottom left of the PCU is plugged out the machine does not come on. Missed it once myself. If i remember correctly there are 3 and the small one has only 2 wires.
Hope it helps -
Try hdd..... And check Psu boardMemento Audere SemperComment
-
Re: MP9000 dead ( fans and standby light on )
yup, PSU blown...Comment
-
Re: MP9000 dead ( fans and standby light on )
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Paul@justmanuals.comComment
Comment