Mp4000 functional problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrfuser
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2007
    • 1598
    #1

    Mp4000 functional problem

    Tags: None
    • rthonpm
      Field Supervisor

      2,500+ Posts
      • Aug 2007
      • 2847
      #2
      Re: Mp4000 functional problem

      Could be any number of things, check the SMC report and find out what codes the machine is actually throwing.

        Comment

        • Tonerbomb
          AutoMajical Resolutionist

          Site Contributor
          2,500+ Posts
          • Feb 2005
          • 2589
          #3
          Re: Mp4000 functional problem

          Originally posted by rthonpm
          Could be any number of things, check the SMC report and find out what codes the machine is actually throwing.
          X2 !!!
          Mystic Crystal Revelations

            Comment

            • Herostrat
              Trusted Tech

              100+ Posts
              • Oct 2012
              • 220
              #4
              Re: Mp4000 functional problem

              That machine is set in that manner so it resets when certain codes occur,SP5875 is to enable or disable SC auto reboot I beleve.
              There are several types of SC codes,ones that detect and describe problems that culd damage machine,ones that focus on certain part of machine and so on...
              SMC list will tell u best or you can look them up under section 7403 in service mode.
              Gears,springs,clutches,sliders,connectors and electronics...who on earth can tell what's wrong with it?

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 36807
                  #5
                  Re: Mp4000 functional problem

                  Originally posted by Herostrat
                  That machine is set in that manner so it resets when certain codes occur,SP5875 is to enable or disable SC auto reboot I beleve.
                  There are several types of SC codes,ones that detect and describe problems that culd damage machine,ones that focus on certain part of machine and so on...
                  SMC list will tell u best or you can look them up under section 7403 in service mode.
                  SP5875-001 to be exact. Set it to 1 one and the machine will display the SC.

                    Comment

                    Previous template Next
                    Working...