Despite owning the Just Manuals for this machine, we don't show this code. Lovely. Any help out there, please?
-
-
Re: A
You'll need to be just a teeny bit more specific. Maybe you could tell us what manufacturer, what model, what code, ... that sort of thing.
If you want help that is.
I'm not feeling particularly psychic today. =^..^=Last edited by blackcat4866; 03-20-2014, 04:17 PM.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: A
Sorry, the title was supposed to read "Ricoh Aficio 2060 SC 552" This is indicative of what kind of week I have had--again, sorry. Just shows I need to proofread posts! Any help would be much appreciated. Do not understand why it is not in the "manual" i downloaded from Just Manuals.Comment
-
Re: A
It's on page 4-54(492) of the Manual...
Fusing thermistor error 2
Fusing lamp disconnected
Thermistor bent, damaged
Thermistor position incorrectComment
-
Comment
-
Re: A
I don't have the manual for that particular model, but I looked in three other model manuals, and they all said the same thing: SC552 Pressure roller thermistor error.
I haven't seen your copy of the manual, but before you get too excited, be sure that you've checked the section of Troubleshooting > Error Conditions > Description. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: A
[QUOTE=sandmanmac;409236]The manual I have includes 1060 (B064)/2060 (B140)....among others
The code doesn't exist in the 1060.
I would suggest you're not looking at the correct (B140) SC table.[/
It turns out that you are right on, if I had looked further down, I would have found it on my own, but would have missed all this great convo with all you handsome helpful boys! Thanks!
SharonComment
-
Re: A
Clearly you haven't been to my profile page. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: A
open manual > control + F > enter code > problem solved.Comment
-
Re: A
You might find it helpful to have a copy of Goose's Guide. I think there might be a copy download in at least one thread. Just try searching CTN. The latest release was April 2013.Comment
-
Re: A
I'm not feeling particularly psychic today. =^..^=[/QUOTE]
Psycho Yes, Psychic no.
sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
Comment