Ricoh MP 5001

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • iscott
    Trusted Tech

    250+ Posts
    • Mar 2010
    • 344
    #1

    Ricoh MP 5001

    Counter at 250K Copies ok but want to replace Developer.....last time we replaced developer in one of these machines developer box started leaking and ended up replacing dev again this time with new box. My question is.....Is it necessary to replace the box every other time you replace dev. or just do bushings?

    Thanks
    Tags: None
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37346
      #2
      Re: Ricoh MP 5001

      No. Just be certain that you do not damage it.

        Comment

        • Eric1968
          Service Manager

          1,000+ Posts
          • Jan 2009
          • 2458
          #3
          Re: Ricoh MP 5001

          Vacuum the waste toner path of the pcu before you change the developer. Make sure to put a piece of paper between the pcu and the development unit when you initialize the developer. After that make some copies with high coverage until the machine is going to ask for toner. Then remove the piece of paper.
          Also make sure the development roller is not contaminated with toner.

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: Ricoh MP 5001

              This Parts & Service Manual can now be purchased for $14.77 and downloaded immediately from:

              http://www.justmanuals.com



              Paul@justmanuals.com

                Comment

                Previous template Next
                Working...